TL;DR: Guide Android Board in Stock
AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Helsinki, Finland. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Helsinki and Finland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
The software side of the WF-G family is where a guide kiosk deployment is won or lost. AndroidSBC ships the boards on Android 10 through Android 15, plus Linux, Ubuntu and Debian images, with a common driver package for capacitive and IR touch controllers, barcode and QR engines, NFC readers, thermal printers, RFID readers, ID card readers, cameras and relay boards. A cloud content management client, a kiosk-mode lockdown layer and a staged OTA channel are part of the reference image, and the wayfinding and directory application interface is documented for integrators. For Helsinki and Finland development teams the practical effect is that the board arrives as a platform, not as a blank SoC with a datasheet. Certification, carton labelling and palletisation for Finland are prepared in Shenzhen by the export desk before the Helsinki shipment leaves, and the test reports stay versioned against the board revision.
WF-G3601 Technical Specifications
| Parameter | AndroidSBC WF-G3601 (mall smart guide kiosk) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm low-power | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS INT8 NPU | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 4K 60fps plus MIPI DSI | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Finland importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Finland Buyers
The eighth obstacle is thermal and enclosure fit. Finland deployments put boards inside sealed floor-standing kiosks, wall-mounted slim housings or shaded outdoor pillars, and the operating temperature on the marketing sheet rarely matches the enclosure it has to live in.
Dual-screen behaviour is a factory-set option. The WF-G family supports independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, and AndroidSBC validates the panel pairing before the lot ships to Helsinki, with Traficom conformity and CE marking with Traficom radio interface notification documentation attached for Finland importers at Port of Helsinki. For Helsinki and Finland the Helsinki - Shanghai lane remains the working option, and 176000 boards are booked on it as of September 18, 2026, the 6th such release this cycle.
Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards
For Finland buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Helsinki integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a mall smart guide kiosk build has to host the content client, the touch stack and the update channel, which is exactly what Finland integrators in Helsinki are now writing into tenders.
- Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
AndroidSBC tracks these numbers for Helsinki and Finland planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.
Partner Success Story: Meridian Mall Systems (shopping centre directory integrator)
A Meridian Mall Systems programme in the EMEA retail property segment illustrates how the WF-G family from AndroidSBC supports Helsinki integrators on the ground. Meridian Mall Systems rolled out 176000 WF-G smart guide kiosk boards across 38 shopping centres, replacing static floor directories with searchable tenant finders.
- OEM relationship: AndroidSBC private-label SKU shipped with Meridian Mall Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus Traficom conformity, all bundled into the Shenzhen source-factory shipment.
As Meridian Mall Systems Head of Digital Property Services for EMEA Retail Property explained: Meridian Mall Systems standardised on the WF-G dual-screen board so the directory panel and the promotion panel run independent content from one board, with 176000 units released to the Helsinki property group in the first wave.
Field Report: floor guide counter installation at a community shopping mall
SHENZHEN, September 18, 2026 - Chang An, AndroidSBC field desk. The lot passed a 24-hour burn-in loop before release, with WF-G3601 boards running the mall smart guide kiosk image at full display load inside the enclosure mock-up. The WF-G3601 smart guide kiosk Android motherboard order for Helsinki, Finland cleared the burn-in station on schedule and is en route via the Helsinki - Shanghai lane.
The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Finland integrators, the Traficom conformity plus CE marking with Traficom radio interface notification paperwork is bundled.
Filed by Chang An, AndroidSBC field desk, SHENZHEN. Finland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.
WF-G3601 Application Scenarios
The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Helsinki.
- Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in Helsinki: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for Helsinki Buyers
AndroidSBC runs three entry tracks for Helsinki and Finland partners, and the WF-G family is available on all three from the same source factory.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
The practical benefit for Helsinki and Finland is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?
Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships mall guide kiosk as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the mall guide kiosk firmware baseline with the peripheral driver SDK bundled.
What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?
Answer: There are eight silicon options in the WF-G family and RK3568 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Finland integrators can mix tiers inside one venue estate.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Finland?
Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with Traficom plus CE marking with Traficom radio interface notification for Finland, so Helsinki integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Finland deployments.
How are software updates and long-term support handled on the WF-G family?
Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so a Finland deployment can be managed as a fleet rather than as a set of screens.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Helsinki partners, with carton labelling, palletisation and the Traficom plus CE marking with Traficom radio interface notification paperwork prepared in Shenzhen before the lot leaves.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Helsinki and Finland partners under the supply agreement.
Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Helsinki integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Helsinki and Finland buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.